The Intel(R) Serial IO I2C Host Controller - 9D60 is a device driver used by certain Intel-based systems (especially those with Intel chipsets, such as Intel 8th, 9th, 10th, and newer generations) to manage communication between the operating system and the I2C (Inter-Integrated Circuit) bus interface. The I2C interface is a two-wire serial communication protocol used to connect low-speed devices (e.g., sensors, display controllers, embedded peripherals) to the system's motherboard.

What is the Intel(R) Serial IO I2C Host Controller?

The Intel(R) Serial IO I2C Host Controller driver is a software component that helps the operating system (usually Windows) interact with and control the Intel Serial IO interface. This interface is used to enable I2C functionality for various components such as:

• Touchscreens and displays
• Sensors (e.g., ambient light sensors, temperature sensors)
• Low-power peripheral devices connected to the motherboard via the I2C bus
• Embedded controllers on the system

The device identified as 9D60 is part of the Intel Serial IO family, which can be found on Intel chipsets, and allows the operating system to control or access these connected I2C devices.

How to Install the Intel(R) Serial IO I2C Host Controller Driver (9D60) on Windows

Intel(R) Serial IO I2C Host Controller - 9D60 driver on your Windows computer.

Method 1: Automatic Driver Update via Windows Update

Windows may automatically detect and install the required drivers for your hardware. Follow these steps:

1. Check for Windows Updates:

   • Open Settings (press Windows key + I).
   • Go to Update & Security.
   • Click on Windows Update and then click Check for updates.
   • If a driver update for the Intel(R) Serial IO I2C Host Controller is available, Windows should automatically download and install it.

2. Reboot Your PC:

   • After the driver is installed, restart your computer to ensure the changes take effect.

Method 2: Manual Installation via Device Manager

If Windows Update doesn't find the driver, you can manually install it via Device Manager:

1. Open Device Manager:

   • Right-click on the Start menu and select Device Manager.
   • Alternatively, you can press Windows key + X and select Device Manager.

2. Locate the Intel(R) Serial IO I2C Host Controller:

   • In Device Manager, expand the section called System Devices.
   • Look for Intel(R) Serial IO I2C Host Controller - 9D60Other devices section.

3. Update the Driver:

   • Right-click on Intel(R) Serial IO I2C Host Controller - 9D60 and select Update Driver.
   • In the prompt that appears, choose Search automatically for updated driver software.
   • Windows will search online for the latest driver and install it if available.

4. Reboot the System:

   • Once the driver is installed, restart your computer.

Method 3: Download and Install the Driver from Intel's Website

1. :

   • Navigate to Intel Download Center.
   • Search for "Intel Serial IO" or use the model number of your chipset (e.g., Intel 9th gen chipset, Intel 10th gen chipset) to find the relevant drivers.

2. Download the Driver:

   • Locate and download the Intel Serial IO driver package that matches your system's chipset and operating system version (e.g., Windows 10, 64-bit).

3. Install the Driver:

   • Run the downloaded driver installer and follow the on-screen instructions to complete the installation.

4. Reboot Your Computer:

   • After installation is complete, restart your computer.

Method 4: Using Intel Driver & Support Assistant

Intel provides a tool called Intel Driver & Support Assistant (Intel DSA), which can automatically detect your Intel hardware and recommend the appropriate drivers for your system. Here's how to use it:

1. Download Intel DSA:

   • Go to Intel Driver & Support Assistant and download the tool.

2. Run the Tool:

   • Install and launch the Intel DSA. It will scan your system for Intel hardware components, including the Serial IO controller.

3. Follow the Recommendations:

   • Intel DSA will provide a list of recommended updates. If it finds an update for the Serial IO I2C Host Controller, follow the prompts to download and install the driver.

4. Reboot:

   • After installation, restart your computer to apply the updates.

Troubleshooting

• Driver Not Found: If you're unable to find the driver via Windows Update or the Intel website, it's possible that your specific system model or chipset may require a driver update from the laptop or motherboard manufacturer (e.g., Dell, HP, Lenovo).

• Device Not Working After Installation: If the I2C device (e.g., touchscreen or sensor) is not working correctly after installing the driver, check for BIOS updates on your motherboard or system, as they may include updates to the Intel Serial IO controller.

• Yellow Triangle in Device Manager: If you see a yellow exclamation mark next to the Intel(R) Serial IO I2C Host Controller in Device Manager, it may indicate a problem with the driver installation. In that case, try reinstalling the driver manually, or download the driver directly from the Intel or your laptop's manufacturer website.

By following these steps, you should be able to successfully install or update the Intel(R) Serial IO I2C Host Controller - 9D60 driver on your Windows computer.