|
Home | Download | Why | Support | Blog | How it works | Contact us
|
Back to Scan Result
|
|
Your download will begin in a moment...
|
|
A cup of coffee will help us work harder,keep our eyes open very late.
Our software offered on this site is free, and we hope that you find it useful. If you'd like to support future development and new product features, please make a (non-tax-deductible) donation via PayPal - a secure online banking service. These donations are used to cover my ongoing expenses - web hosting, domain registrations, and software and hardware purchases.
Please use one of the following buttons to make a donation from either your PayPal account or using one of the major credit cards. If you would like to donate different amount please send us an e-mail and We'll prepare a secure link for your donation.
|
|
|
|
The Marvell RAID Virtual Device driver is a software component used to enable and manage RAID (Redundant Array of Independent Disks) configurations on systems with Marvell RAID controllers. RAID technology combines multiple hard drives or SSDs to improve data redundancy, performance, or both. Marvell provides RAID controllers for managing these configurations, and the Virtual Device driver is typically associated with software or virtualized environments that need to manage RAID arrays on Marvell hardware.
What the Marvell RAID Virtual Device Driver Does:
- Enables RAID functionality: The driver allows your operating system to recognize and interact with RAID arrays managed by a Marvell RAID controller.
- Manages Virtual Devices: In the context of RAID, a "virtual device" typically refers to a logical disk or RAID volume that has been created from multiple physical drives.
- Improves performance & reliability: The driver ensures optimal communication between the operating system and the hardware RAID controller, enabling better performance and data redundancy depending on the RAID level chosen (RAID 0, RAID 1, RAID 5, etc.).
How to Install the Marvell RAID Virtual Device Driver on Windows:
1. Download the Driver:
- Go to the Marvell website or your motherboard manufacturer’s support page (if the RAID controller is part of a motherboard chipset).
- Find the appropriate RAID driver for your system. Make sure to select the version compatible with your operating system (e.g., Windows 10, Windows 11, etc.).
- Typically, Marvell drivers are available in compressed
.zip
format or as an executable .exe
installer.
2. Prepare for Installation:
- Before installing the driver, ensure that the RAID array is properly configured in the system's BIOS/UEFI setup if it is not already.
- If you need to create or manage a RAID array, you may have to use Marvell’s BIOS utility (accessible during boot), or the Marvell RAID Console software if it’s already installed.
3. Install the Driver:
Option 1: Using the Executable File
- Run the
.exe
file you downloaded, which will guide you through the installation process.
- Follow the on-screen prompts to install the driver. After installation, restart the system.
Option 2: Using Device Manager (Manual Installation)
If you downloaded a .zip
file with the driver files:
- Extract the contents of the
.zip
file to a folder on your computer.
- Open Device Manager:
- Press
Win + X
and select Device Manager.
- Look for Storage controllers or RAID controllers.
- Right-click on the controller, and select Update driver.
- Choose Browse my computer for driver software.
- Point to the folder where you extracted the driver files.
- Follow the on-screen instructions to complete the installation.
4. Verify the Installation:
- After installation and reboot, open Device Manager again to ensure there are no errors or warnings next to the RAID controller.
- You can also check the Marvell RAID Configuration Utility or RAID Management Console (depending on the version you installed) to see if your RAID array is detected and functioning properly.
5. Troubleshooting:
- If the driver fails to install, verify that the correct driver is being used for your operating system version.
- Ensure that the RAID controller is enabled in the BIOS/UEFI.
- If you're encountering problems with the RAID array itself (such as an array not appearing), you may need to check the physical connections, RAID configuration settings, or try reinstalling the driver.
Additional Notes:
- BIOS/UEFI Settings: Marvell RAID controllers may require specific settings in your system's BIOS/UEFI (e.g., enabling RAID mode or selecting the correct boot device).
- RAID Management Software: After installing the driver, you may want to install Marvell's RAID management software (if provided) for more advanced features like monitoring, rebuilding arrays, and configuring RAID levels.
- Compatibility: Ensure that your operating system is compatible with the version of the driver you're installing.
By following these steps, you should be able to install the Marvell RAID Virtual Device driver and manage your RAID arrays effectively on your Windows machine.